T + A Solitaire P


T + A Solitaire P

High End Planar Magnetostatic Headphones,
wired transmission. Cable options are unbalanced 6,35 mm,
balanced 4,4 mm Pentaconn, or 4 pin XLR

Technical Highlights
Solitaire P Planar-magnetostatic headphones
Impedance 80 Ohms
Frequency response 5 Hz – 54 kHz
Distortion < 0,015 % @ 100 dB
Type of construction open, over ear
Choose an option
T + A Solitaire P – 4 pin XLR

Available on backorder

T + A Solitaire P – 4.4mm Pentaconn

Available on backorder

T + A Solitaire P – unbalanced 6.35mm/1/4"

Available on backorder

SKU: N/A Categories: ,


Solitaire P

Solitaire P Headphones

It is not a coincidence that our headphones bear the name Solitaire. Back in 1983 our founder developed T+A’s first planar-electrostatic transducer: the mid-high range unit for the Solitaire OEC active loudspeaker, which remains a legend to this day. Since that time we have continued to exploit this principle for our High-End speakers. The current Solitaire CWT range employs a planar-electrostatic mid-range / treble unit whose frequency range extends up to and beyond 50,000 Hz, and which is capable of generating sound pressure levels above 120 dB. The diaphragm of these transducers consists of a special ultra-thin film, driven by a powerful electrical field.

This principle was the obvious choice for our first headphones, based on the exceptional qualities of this type of planar transducer and our thirty-five years of experience in the development and manufacture of film transducers. Planar-magnetic transducers are very similar to electrostatic devices, as their diaphragm also consists of a thin film driven by a strong magnetic field. For that reason it was therefore natural to start our headphone division by developing open planar systems for our first headphone series, and build them here in Herford. The fundamental designs of planar magnetic systems are ideally suited to High-End headphones, and are inherently superior to dynamic alternatives.
Our flagship model bears the name of the Series: The Solitaire P was introduced in March 2020 and quickly became a references level headphone, cherished by critics and customers alike. The Solitaire P-SE brings the spirit of the Solitaire P to a new and exciting price point.



Show more

Design Philosophy

In every transducer – regardless of whether a loudspeaker or headphones – the diaphragm needs to be driven as evenly as possible. To a limited extent dynamic systems based on voice coils are partially successful in this, but planar systems – such as electrostatic or magnetostatic devices – are much more effective in this regard, since the driving force in both these processes is distributed over the whole of the diaphragm, rather than being localised at the coil position. In principle the actual transducer of our magnetostat consists of rod-shaped high-performance neodymium magnets of varying length, with an innovative pole geometry. These magnets are held in a precise, accurately manufactured mount which guarantees the positioning of the magnetic poles to an accuracy of a few hundredths of a millimetre. This design generates a totally linear magnetic field, in which the special ultra-lightweight diaphragm moves. The diaphragm itself is only a few µm thick, and consists of a structurally stable High-Tech polymer material; it also bears an array of very light conductors – also only µm thick – which are applied in a sophisticated, highly precise photo-chemical process. This unique technology ensures that the entire surface of the diaphragm is driven absolutely evenly, thereby eliminating the partial oscillations which are unavoidable with localised drive systems. The net result is a series of transducers with an enormously wide dynamic range, high peak sound pressures and extremely impressive linearity and freedom from distortion.
Our Solitaire P and Solitaire P-SE headphones are driven by our in house transducers TPM 3100 and TPM 2500, respectively. Both of which are manufactured in Herford, Germany.


Additional information

Weight 8 lbs
Dimensions 24 × 19 × 8 in
Solitaire P

4 pin XLR, 4.4mm Pentaconn, unbalanced 6.35mm/1/4"


There are no reviews yet.

Be the first to review “T + A Solitaire P”

Your email address will not be published.